ARRL EME contest early November 37 contacts! by Mark Thompson AE6GD

Hi all,

I had my EME station up in time for the EME contest last weekend. I’m working the 1296 MHZ band. There was lots of activity but due to the rain and cloudy sky it was a challenge. Normally I aim the antenna at the moon with a video camera mounted and bore sighted. This is very accurate.

But when the moon is behind clouds, I have to rely on elevation and azimuth readings from my position readout. Then I can be a few degrees off due to calibration of the readout and mechanical flexing of the antenna. Still, I did ok with about 37 contacts.

The second half of the contest is the weekend of November 28. Hopefully it won’t rain. Attached are pictures of the antenna and shack. I’m using a transverter (1296 MHZ to 28 MHZ) and my TS-590 rig. The power amplifier is rated at 300 watts. The software is WSJT-X with 30 second timing (mode 30B). The antenna is in my back yard but the shack is in the garage. The connecting cables are more than 100 feet long, so it was a technical challenge to make it work! One coax carries the IF at 28 MHZ from the transverter to the shack where the rig is located. The rest is CAT-5 cable for all the controls and monitor functions.

73, Mark AE6GD 

Hi all,

I had my EME station up in time for the EME contest last weekend. I’m working the 1296 MHZ band. There was lots of activity but due to the rain and cloudy sky it was a challenge. Normally I aim the antenna at the moon with a video camera mounted and bore sighted. This is very accurate.

But when the moon is behind clouds, I have to rely on elevation and azimuth readings from my position readout. Then I can be a few degrees off due to calibration of the readout and mechanical flexing of the antenna. Still, I did ok with about 37 contacts.

The second half of the contest is the weekend of November 28. Hopefully it won’t rain. Attached are pictures of the antenna and shack. I’m using a transverter (1296 MHZ to 28 MHZ) and my TS-590 rig. The power amplifier is rated at 300 watts. The software is WSJT-X with 30 second timing (mode 30B). The antenna is in my back yard but the shack is in the garage. The connecting cables are more than 100 feet long, so it was a technical challenge to make it work! One coax carries the IF at 28 MHZ from the transverter to the shack where the rig is located. The rest is CAT-5 cable for all the controls and monitor functions.

73, Mark AE6GD 

Hi all,

I had my EME station up in time for the EME contest last weekend. I’m working the 1296 MHZ band. There was lots of activity but due to the rain and cloudy sky it was a challenge. Normally I aim the antenna at the moon with a video camera mounted and bore sighted. This is very accurate.

But when the moon is behind clouds, I have to rely on elevation and azimuth readings from my position readout. Then I can be a few degrees off due to calibration of the readout and mechanical flexing of the antenna. Still, I did ok with about 37 contacts.

The second half of the contest is the weekend of November 28. Hopefully it won’t rain. Attached are pictures of the antenna and shack. I’m using a transverter (1296 MHZ to 28 MHZ) and my TS-590 rig. The power amplifier is rated at 300 watts. The software is WSJT-X with 30 second timing (mode 30B). The antenna is in my back yard but the shack is in the garage. The connecting cables are more than 100 feet long, so it was a technical challenge to make it work! One coax carries the IF at 28 MHZ from the transverter to the shack where the rig is located. The rest is CAT-5 cable for all the controls and monitor functions.

73, Mark AE6GD 

Bookmark the permalink.

Comments are closed.